Water softener issues are more common than most homeowners would probably assume, and these types of malfunctions can sometimes be pretty annoying when they impact things like your dish cleanliness and shower efficiency.
We’ve teamed up with the water softener repair salt lake city ut experts at Beehive Plumbing to develop this list of the most common water softener repairs that homeowners tend to experience.
So, if you own a water softener and are concerned about its performance, consider the following issues that might be plaguing your unit!
Salt Tank Issues
The most common salt tank issues that water softeners experience are connected to salt levels and salt bridges.
Salt bridges refer to excessive salt buildups that occur when salt fuses together and creates a thick crust on top of your water softener’s salt tank. This can be very detrimental to the water softener’s functionality, mainly because it can impact the unit’s ability to maintain proper salt levels. The easiest way to resolve a salt bridge is to use a rubber mallet to break away the buildup around the brine tank.
Salt levels are another huge issue connected to water softener salt tanks. If you aren’t maintaining correct salt levels within your unit, you’ll likely experience a malfunction. This also means that you should be using the correct type of salt for your system, but the good news is that professional plumbers can help you monitor these salt tank dilemmas and guide you toward your most affordable solutions.
Timer Problems
Most electric water softeners run on timers that help maintain necessary regeneration schedules, but power outages and other electrical issues can affect your water softener clock and throw regeneration schedules off course. It’s crucial to make sure that your water softener’s clock reads the actual time, and not previously established regeneration times.
What’s problematic about incorrect timers is that the unit might end up cycling while you’re using water—which it isn’t supposed to do. This can be a huge issue because water doesn’t pass through your water softener as it’s cycling, which allows hard water into your plumbing system.
So, always be sure that your regenerations cycles are set for appropriate times!
Electrical Power Dilemmas
Your water softener’s electrical power source is crucial for a lot more than just its regeneration cycle, so blowing a fuse or losing power can impact your unit’s overall functionality.
This is why you should always be checking your fuse box on a regular basis, or reaching out to professional plumbers for routine inspections that include fuse box checkups. It’s sometimes possible that you’re experiencing an outlet malfunction when everything else seems to be working correctly, except your water softener.
Resin Bed Repairs
Most water softeners feature thousands of resin beads that are found within a component that’s known as a resin bed. The resin bed is such a crucial part of your water softener, because this is where hard water minerals will be removed from your water prior to entering your plumbing system.
However, it’s important to remember how resin beds can get depleted after long periods of heavy usage, which means that fewer beads will be catching hard water minerals that enter your water softener.
And depending upon what type of water softener you have, replenishing a depleted resin bed can often be a pretty extensive repair project!
Bypass Valve Malfunctions
Your water softener has a function that’s typically called bypass mode, and this subsequently means that your unit will have a bypass valve that’s located near the top of the tank. When your unit is in bypass mode, water won’t be softened as you’d typically expect it to be.
Although there are some water softeners that allow users to turn off their bypass valve, it’s often a pretty complex procedure that requires a professional plumber to make sure everything goes smoothly.
Faulty Motors
Water softeners have motors, which means that faultiness and other malfunctions are sometimes inevitable. Water softener motors are important for the regeneration cycling process, because this is what actually allows the system to properly discharge hard mineral backwash and ensure long-term operations.
In most cases, faulty motors will need to be replaced. This is never a DIY project, and you should only work with licensed plumbers who conducted your water softener installation to ensure that the motor returns to its proper form. You should also check your water softener’s warranty to see if you’re eligible for free replacement services.
Contact Beehive Plumbing When You Need A Water Softener Repair In Salt Lake City UT!
There are a lot of different repair issues that might impact your home’s water softener, and the above projects are just a small snippet of what can potentially happen.
Water softeners are crucial for countless homes, particularly in susceptible areas like Salt Lake City UT. But the good news is that there are plenty of experienced plumbing experts that are always willing to get your water softener back to a normal functionality, and one of the best plumbing companies in Salt Lake City is Beehive Plumbing.
The Beehive specialists are just a few clicks away when you go to the link at the top of this page, so reach out to them when you have questions or concerns regarding your property’s water softener system!
Comments are closed.